Sensors Archives < RealTech Controls E-store https://estore.realtechcontrols.com/product-category/sensors/ Online Store for Industrial Instrumentation Sun, 01 Jan 2023 18:53:50 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://estore.realtechcontrols.com/wp-content/uploads/2020/04/cropped-RT-Logo-Site-Icon-640x640-1-32x32.jpg Sensors Archives < RealTech Controls E-store https://estore.realtechcontrols.com/product-category/sensors/ 32 32 EMEC ERH ORP Sensor https://estore.realtechcontrols.com/product/emec-erh/?utm_source=rss&utm_medium=rss&utm_campaign=emec-erh Tue, 12 May 2020 18:58:40 +0000 https://estore.realtechcontrols.com/?post_type=product&p=440 General purpose ORP sensor

Ask for quote

  • 12mm Plastic Smooth Body Electrode, Fully waterproof (submersible)
  • BNC Connector for controller attachment
  • ORP range of -1000mV to +1000mV
  • Flat self-cleaning bulb end, and double junction options
  • Low cost, reliable probe ideal for cooling tower use (requires optional probe holder)
  • 100 PSI at 158°F, or 50 PSI at 176°F (7 Bar at 70°C, or 3.5Bar at 80°C)
  • Optional 0.8m, 4.5m, or 15m Cable Lengths with BNC Connector
  • SN6 Thread mounting option available

EMEC ERH Sensor Data Sheet

Options below are only:

  • Single Junction with protective guard, all cable lengths, and standard mounting.
  • Double Junction with flat bulb end, 14.8ft cable only, and standard mounting.
  • Single Junction with protective guard, 49ft cable only, and SN6 connector mounting.
  • Double Junction with flat bulb end, 49ft cable only, and SN6 connector mounting.

The post EMEC ERH ORP Sensor appeared first on RealTech Controls E-store.

]]> The EMEC ERH ORP Sensor is a low cost, reliable sensor for general purpose ORP measurement. The body is a plastic 12mm smooth form, and comes standard with bulb protection. Various cable lengths are available, along with an SN6 mounting option.

Visit our company website page for more information: ORP Sensors

Recommended pH Controller: EMEC ORP Controllers

Ask for quote

The post EMEC ERH ORP Sensor appeared first on RealTech Controls E-store.

]]> EMEC EPH pH Sensor https://estore.realtechcontrols.com/product/emec-eph/?utm_source=rss&utm_medium=rss&utm_campaign=emec-eph Tue, 12 May 2020 17:54:35 +0000 https://estore.realtechcontrols.com/?post_type=product&p=433 General purpose pH sensor

Ask for quote

  • 12mm Plastic Smooth Body Electrode, Fully waterproof (submersible)
  • BNC Connector for controller attachment
  • 0-14pH with 0.01 Resolution Accuracy
  • Flat self-cleaning bulb end, and double junction options
  • Low cost, reliable probe ideal for cooling tower use (requires optional probe holder)
  • 100 PSI at 158°F, or 50 PSI at 176°F (7 Bar at 70°C, or 3.5Bar at 80°C)
  • Optional 0.8m, 4.5m, or 15m Cable Lengths with BNC Connector
  • SN6 Thread mounting option available

EMEC EPH Sensor Data Sheet

Options below are only:

  • Single Junction with protective guard, all cable lengths, and standard mounting.
  • Double Junction with flat bulb end, 14.8ft cable only, and standard mounting.
  • Double Junction with protective guard, 14.8m cable only, and SN6 connector mounting.

The post EMEC EPH pH Sensor appeared first on RealTech Controls E-store.

]]> The EMEC EPH pH Sensor is a low cost, reliable sensor for general purpose pH measurement. The body is a plastic 12mm smooth form, and comes standard with bulb protection. Various cable lengths are available, along with an SN6 mounting option.

Visit our company website page for more information: pH Sensors

Recommended pH Controller: EMEC pH Controllers

Ask for quote

The post EMEC EPH pH Sensor appeared first on RealTech Controls E-store.

]]> EMEC SCL18 Self-Cleaning Free Chlorine Sensor https://estore.realtechcontrols.com/product/emec-scl18/?utm_source=rss&utm_medium=rss&utm_campaign=emec-scl18 Sun, 10 May 2020 19:48:34 +0000 https://estore.realtechcontrols.com/?post_type=product&p=410 EMEC SCL18 Series Self-Cleaning Free Chlorine Sensor
* EMEC LDSCL PLUS Chlorine controller sold separately *

Ask for quote

  • Free (Available) Chlorine measurement for Sodium Hypochlorite
  • Dirty water applications
  • pH compensated with max 10% error per pH point
  • Max operating pH of 9
  • Temperature Compensated for 41-158°F Operation
  • 116 PSI Max Pressure
  • Digital interface to controller for auto sensor and range detection
  • Probes available for measuring ranges of 0-0.5ppm (SCL18/0.5), 0-2ppm (SCL18/2) or 0-20ppm (SCL18/20)
  • The SCL18/0.5 can also be used for Zero-Chlorine detection and measurement

EMEC SCL Series Data Sheet
EMEC SCL18 Instruction Manual

The post EMEC SCL18 Self-Cleaning Free Chlorine Sensor appeared first on RealTech Controls E-store.

]]> The EMEC SCL18 Self-Cleaning Free Chlorine Sensor is a closed dual electrode sensor offering reliable, repeatable and accurate measurements of free inorganic Chlorine (Sodium Hypochlorite) for dirty water applications. Glass balls inside a sealed chamber abrade against the electrodes, removing any build up or debris that would normally accumulate on the electrodes. Various ranges are available.

With patented membrane and electronic technology, measurements are almost instantaneous with the controller updating the display every second.

Recommended Chlorine Controller: EMEC LDSCL PLUS

Visit our company website page for more information: Chlorine System

Ask for quote

The post EMEC SCL18 Self-Cleaning Free Chlorine Sensor appeared first on RealTech Controls E-store.

]]> EMEC SCL8 Total Chlorine Sensor https://estore.realtechcontrols.com/product/emec-scl8/?utm_source=rss&utm_medium=rss&utm_campaign=emec-scl8 Sun, 10 May 2020 18:44:13 +0000 https://estore.realtechcontrols.com/?post_type=product&p=398 EMEC SCL8 Series Total Chlorine Sensor
* EMEC LDSCL PLUS Chlorine controller sold separately *

Ask for quote

  • Total Chlorine measurement
  • Clean / fresh / drinking water applications
  • pH compensated with max 10% error per pH point
  • Max operating pH of 12
  • Temperature Compensated for 34-104°F Operation
  • 15 PSI Max Pressure
  • Digital interface to controller for auto sensor and range detection
  • Probes available for measuring ranges of 0-2ppm (SCL8/2) or 0-20ppm (SCL8/20)

EMEC SCL Series Data Sheet
EMEC SCL Series Instruction Manual

The post EMEC SCL8 Total Chlorine Sensor appeared first on RealTech Controls E-store.

]]> The EMEC SCL8 Total Chlorine Sensor is a closed Amperometric sensor offering reliable, repeatable and accurate measurements of total Chlorine for fresh water applications. Various ranges are available.

With patented membrane and electronic technology, measurements are almost instantaneous with the controller updating the display every second.

Recommended Chlorine Controller: EMEC LDSCL PLUS

Visit our company website page for more information: Chlorine System

Ask for quote

The post EMEC SCL8 Total Chlorine Sensor appeared first on RealTech Controls E-store.

]]> EMEC SCL3N Free Chlorine Sensor https://estore.realtechcontrols.com/product/emec-scl3n/?utm_source=rss&utm_medium=rss&utm_campaign=emec-scl3n Sun, 10 May 2020 17:57:58 +0000 https://estore.realtechcontrols.com/?post_type=product&p=391 EMEC SCL3N Series Free Chlorine Sensor
* EMEC LDSCL PLUS Chlorine controller sold separately *

Ask for quote

  • Free (Available) Chlorine measurement for Sodium Hypochlorite
  • Clean / fresh / drinking water applications
  • pH compensated with max 10% error per pH point
  • Max operating pH of 9
  • Temperature Compensated for 34-104°F Operation
  • 15 PSI Max Pressure
  • Digital interface to controller for auto sensor and range detection
  • Probes available for measuring ranges of 0-0.5ppm (SCL3N/0.5), 0-2ppm (SCL3N/2) or 0-20ppm (SCL3N/20)
  • The SCL3N/0.5 can also be used for Zero-Chlorine detection and measurement

EMEC SCL Series Data Sheet
EMEC SCL Series Instruction Manual

The post EMEC SCL3N Free Chlorine Sensor appeared first on RealTech Controls E-store.

]]> The EMEC SCL3N Free Chlorine Sensor is a closed Amperometric sensor offering reliable, repeatable and accurate measurements of free inorganic Chlorine (Sodium Hypochlorite) for fresh water applications. Various ranges are available, as well as self-cleaning probe options for dirty water environments.

With patented membrane and electronic technology, measurements are almost instantaneous with the controller updating the display every second.

Recommended Chlorine Controller: EMEC LDSCL PLUS

Visit our company website page for more information: Chlorine System

Ask for quote

The post EMEC SCL3N Free Chlorine Sensor appeared first on RealTech Controls E-store.

]]> EAH OCPF82 ORP Sensor https://estore.realtechcontrols.com/product/eah-ocpf82/?utm_source=rss&utm_medium=rss&utm_campaign=eah-ocpf82 https://estore.realtechcontrols.com/product/eah-ocpf82/#respond Fri, 01 May 2020 19:40:30 +0000 https://estore.realtechcontrols.com/?post_type=product&p=177 Industrial, High Performance ORP Sensor
* Cable sold separately *

Ask for quote

  • Industrial, rugged ORP probe, with waterproof cable connector
  • Measures -1500 to  1500mV, 0 to 80 °C (32 to 176 °F)
  • Head options for flat, or protective guard
  • Cast-In-Place solid reference electrolyte helps maintain a constant reference cell potential
  • Porous Teflon liquid junction resists fouling & chemical attacks
  • Internal plunger permits 360 degree mounting
  • Double junction reference cell increases service life in some applications
  • Threaded 3/4 inch NPT on both ends for easy installation
  • High temperature versions, and PT100 sensor output available upon request

EAH OCPF82 Data Sheet

The post EAH OCPF82 ORP Sensor appeared first on RealTech Controls E-store.

]]> The Endress & Hauser EAH OCPF82 Industrial, rugged, high performance ORP sensors have a built-in internal plunger, permitting 360 degree mounting orientation. Concave and flat membrane head designs are available for bulb protection, and are manufactured with a cast-in-place solid reference electrolyte to maintain a constant reference cell potential.
The EAH OCPF82 has a porous Teflon liquid junction which resists fouling & chemical attacks, and consists of a double junction reference cell for increased service life. Threaded 3/4 inch NPT ends, or smooth surface probes as well as options for submersible probe holders, cables, and wiring terminations. Optional high temperature versions, and PT100 temperature output are also available.

Visit our company website page for more information: ORP Sensors

Recommended Controllers: EMEC ORP Controllers

Ask for quote

The post EAH OCPF82 ORP Sensor appeared first on RealTech Controls E-store.

]]> https://estore.realtechcontrols.com/product/eah-ocpf82/feed/ 0 EAH OCPF81/82 Sensor Cables https://estore.realtechcontrols.com/product/eah-opcf81-82-sensor-cables/?utm_source=rss&utm_medium=rss&utm_campaign=eah-opcf81-82-sensor-cables Fri, 01 May 2020 18:54:56 +0000 https://estore.realtechcontrols.com/?post_type=product&p=169 Waterproof Cable for PH & ORP Sensors

  • Suits EAH OCPF81 pH, and EAH OCPF82 ORP sensors
  • Select lengths of 6ft (1.8 meters), 15ft (4.5 meters), or 32ft (10 meters)
  • Optional 3-wire PT100 RTD cables to suit sensors with internal PT100 sensors
  • Waterproof coaxial cable with TOP68 (NEMA 6) sensor connector
  • Rugged PVC construction
  • 2 core BNC & shield for instrument connection
  • Temperature rating of max. 80°C (176 °F).
  • Recommended for all EMEC pH and ORP controllers / analyzers

The post EAH OCPF81/82 Sensor Cables appeared first on RealTech Controls E-store.

]]> EAH OCPF81/82 Sensor Cables are manufactured with a TOP68 (NEMA 6) waterproof connector to be connected to the OCPF81, OCFP82, or any other pH or ORP sensors that have a TOP68 connector. They incorporate a 2 core BNC connector with an additional shield cable, ideal for the EMEC range of controllers and instruments. The cable is made from robust, hard-wearing PVC, with a temperature rating of 80°C (176 °F).

EAH OCPF81/82 Sensor Cables are available with an option to incorporate 3 x RTD temperature sensor wires for sensors that include an internal PT100 RTD for temperature measurement. The 3-wire cable terminations are soldered at the ends for easy installation into terminal blocks for transmitters and controllers

Recommended pH sensor: EAH OCPF81

Recommended ORP sensor: EAH OCPF82

Visit our website page for more information on sensors: Sensors

The post EAH OCPF81/82 Sensor Cables appeared first on RealTech Controls E-store.

]]> EAH OCPF81 pH Sensor https://estore.realtechcontrols.com/product/eah-ocpf81/?utm_source=rss&utm_medium=rss&utm_campaign=eah-ocpf81 https://estore.realtechcontrols.com/product/eah-ocpf81/#respond Fri, 01 May 2020 18:03:40 +0000 https://estore.realtechcontrols.com/?post_type=product&p=162 Industrial, High Performance pH Sensor
* Cable sold separately *

Ask for quote

  • Industrial, rugged pH probe, with waterproof cable connector
  • Measures 0-14pH, 0 to 110 °C (32 to 230 °F)
  • Head options for concave, flat, or protective guard
  • Select option for internal PT100 RTD (3-wire) for temperature reading
  • Cast-In-Place solid reference electrolyte helps maintain a constant reference cell potential
  • Porous Teflon liquid junction resists fouling & chemical attacks
  • Internal plunger permits 360 degree mounting
  • Double junction reference cell increases service life in some applications
  • Threaded 3/4 inch NPT on both ends for easy installation
  • High temperature versions, and PT100 sensor output available upon request

EAH OCPF81 Data Sheet

The post EAH OCPF81 pH Sensor appeared first on RealTech Controls E-store.

]]> The Endress & Hauser EAH OCPF81 Industrial, rugged, high-performance pH sensors have a built-in internal plunger, permitting 360-degree mounting orientation. Concave and flat membrane head designs are available for bulb protection and are manufactured with a cast-in-place solid reference electrolyte to maintain a constant reference cell potential.
The EAH OCPF81 consists of a porous Teflon liquid junction that resists fouling & chemical attacks and consists of a double junction reference cell for increased service life. Threaded 3/4 inch NPT ends, or smooth surface probes as well as options for submersible probe holders, cables, and wiring terminations. Optional high-temperature versions, and PT100 temperature output are also available.

Visit our company website page for more information: pH Sensors

Recommended pH Controller: EMEC pH Controllers

Ask for quote

The post EAH OCPF81 pH Sensor appeared first on RealTech Controls E-store.

]]> https://estore.realtechcontrols.com/product/eah-ocpf81/feed/ 0